Generation Hire and Sale Supply a full range of access ladders to the scaffolding and construction market including Timber Pole Ladders , Galvanised Ladders and Orange Epoxy Coated Ladders. These are supplied by our British manufacturer and comply with all relevant legislation.
New for 2009 a new ladder has been launched to supersede the traditional Orange Epoxy. Using all the original benefits the ladder is now enhanced with a corrosion proof alloy-zinc coating protecting its exterior and interior surface. Preventing rust, chipping and paint flaking.
TUFFSTEEL LADDER NOW AVAILABLE
New TUFFSTEEL LADDER Tested to BSEN Class 1 Strength Criteria, With Aluminium Zinc for Maximum corrosion resistance: which improves overall finish and prevents chipping and flaking of paint. This coating also protects from inner corrosion. Available in 3m,3.5m,4m,5m,6m,7m and 8m sizes.
|
 |
|
Aluminium Extension Ladders
Available as double or triple push up, with standard closed heights from 2.5m to 5.5m
New locking catch, standard on all multiple section ladders
Improved design, allowing sections to be separated for use as single/double ladders
Non slip rubber feet |
 |
|
Pole Ladders
Finest quality, heavy duty ladders
Matched Scandinavian Whitewood stiles, finished with 2 coats of ladder varnish
Hardwood rungs at 250mm centres
Super quality - with tie rods under every rung |
 |
|
Lightweight Stagings
Aluminium box section stiles
Aluminium crossbearers, for lighter weight and greater strength
Combi-board decking, and rubber inserts to underside, to prevent movement
BS2037: Supports 270kg distributed load |
 |
|
Hand Rail Brackets
Designed for use with 450mm or 600mm stagings
Tubular alloy bracket clamps onto stagings
Fittings are adjustable to allow use of scaffold boards for toeboards and scaffold tube for handrails |
 |
|
Orange Steel Ladders
Industrial ladder, tested to BS2037 Class 1 strength criteria
Square, non slip rungs, angled to produce flat surface in position of use
Orange epoxy coating for high visibility rust
protection
Oversize rubber feet at top and bottom allow use either way up
Rounded edge stiles for added strength and comfort |
 |
|
Timber Builders Steps BS1129 Class 1
Industrial quality, constructed from selected softwood
Non slip treads at 250mm centres, pinned into stiles
Fitted with tie rods |
 |
|
Timber Platform Steps BS1129 Class 1
Industrial quality, constructed from selected softwood
Non slip treads at 250mm centres, pinned into stiles
Fitted with tie rods
Slatted platform folds flat when steps are closed |
 |
|
Aluminium Builders Steps BS2037 Class 1
Channel section stiles
Wide, non slip treads at 250mm centres
Rubber feet
Hinged locking stays |
 |
|
Aluminium Platform Steps BS2037 Class 1
Channel section stiles
Wide, non slip treads at 250mm centres
Rubber feet
Large platform (410mm X 300mm)
Hinged locking stays |
 |
|
Aluminium Extension Ladders
Available as double or triple push up, with standard closed heights from 2.5m to 5.5m
New locking catch, standard on all multiple section ladders
Improved design, allowing sections to be separated for use as single/double ladders
Non slip rubber feet |
 |
|
Trade Timber Ladders
Conforms to BS1129
Selected softwood stiles
Hardwood rungs, glued & pinned at 250mm centres
Tie rods under every rung
Varnished finish |
 |
|
Fibreglass Stepladders
Robust EN131 construction
Wide serrated treads
Reinforced moulded plastic top
Hinged locking stays |
 |
|
Roof Ladders
Aluminium box section stiles, with triangular rungs at 250mm centres
Strong wheeled ridge hook assembly
PVC covered bearer bars
Conform to strength requirements of BS EN131 |
 |
|
Surveyors Ladders
Aluminium box section stiles, with triangular rungs at 250mm centres
1m sections fit into car boot
Aluminium spigots allow easy assembly
Conforms to strength requirements of BS EN131 |
 |
